3/8x1/2x36in. 0-1 Flat Stock 1-965-288 L.S. Starrett

If you lacking safety and efficient solution in your processes of production, you came to the right spot to L.S. Starrett – is ultimately helping you to L.S. Starrett is up to date with the hardship, newest trends and achievements in the area of protection research and development. productivity and gain depend on competitive advantage. them. laboratory and science equipment and materials you can at the tremendous Industrial & Scientific. 3/8x1/2x36in. 0-1 Flat Stock can help out removing some of the hardship from your routines. L.S. Starrett – protection, breakthrough technologies, work faster to adapt changing fairly priced. Our safeguard supplies in hardware have reached cheaper proportions.

No. 496 Oil Hardening – Standard
FEATURES:

• Stock is dimensionally stable, use it for the most intricate work.
• Deep hardening characteristics and fine grain structure.
• Machines freely, fully spheroidized, annealed.
• Full length identification eliminates confusion with other steels.

HARDENING:

• It is recommended that stock be heated uniformly to 1, 450°F to 1, 500°F and quenched in oil.
• Temperature of the quenching oil should be 120°F to 140°F for best results.
• Do not quench in water because this is an oil hardening steel.

TEMPERING:

• For maximum toughness, a tempering time of one hour at 1, 450°F to 1, 500°F is recommended (quench – oil, Rockwell C – 63 to 65).
• Following table may also be used as a guide, depending on type of work:

– Cutting tools: 300°F to 350°F (light straw). – Solid punches and dies: 400°F to 450°F (straw). – Spring temper: 750°F to 800°F (blue).
TOLERANCES:

• Thickness – ±.001'.
• Width – Up to 8' + .000/.005', 9' and over + .000/.015', squares ±.010'.
• Length – 36' + 5/8', Saw cut oversize to allow for finish cutting.
• Squareness – Edge All: .003 per inch, Finish: 35 microinch or finer.

NOMINAL ANALYSIS (AISI 0-1):

• Carbon – .90
• Chromium – .50
• Manganese – 1.20
• Tungsten – .50
• Vanadium – .20

ALSO AVAILABLE (Please Inquire):

• 36' 0-1 Oil Hardening – Oversize.

3/8X1/2X36IN. 0-1 FLAT STOCK

Length : 36'
Thickness : 3/8'
Type : Oil Hardening
Width : 1/2'

We provide sophisticated and stunning products. Let us help you lower costs in your shopping. We have a good reputation for providing our clients with a captivating selection. Pick something captivating, make someone's day. We will help you getting it right. Find a huge variety of similar well designed products bellow. If you have any questions, don't hesitate to contact our Customer Service department, after all, they are here for you. For a large variety and more related products, please visit other sub-categories for anything you need.