Panic Device Controller / Power Supply/Charger 24VDC @ 16A in-Rush Aux. Output FAI 115VAC BC300 Enclosure STRIKEIT1 Altronix
Don`t be surprised by our selection, Electronics, Computer & Photo offers standard and non-standard items. It feels very good when the access control power supply for panic hardware outdoes its utility and pays off your investment. Consider this item, it has everything that you have been looking for in a Altronix. We are providing the next generation of astonishing product. Find more intresting items and much more beyond the ordinary: Altronix - ACM8 - Altronix ACM8 Power Controller, or IEI - PIP16VAC - Plug In Power Supply 16.5v Ac and Von Duprin - 900BB - Battery Backup Board, Mounting Hardware.
StrikeIt1
Panic Device Power Controller
Overview
This dual channel unit is designed to provide 24VDC power for a maximum of two electrified panic devices with very high inrush requirements. Each channel has an adjustable relock delay input that will control a pair of doors simultaneously or independent control of two single doors. Unit has two sets of relays per channel which can be configured to trigger external relays, automatic door openers, ADA push plate switches etc. Unit can control automatic door operators where the doors are always locked or where the doors are unlocked during the business day. In addition, two un-switched auxiliary voltage outputs are provided for powering keypads, electronic timers, relays, etc. In addition, a programmable FACP interface will either provide power or remove power to the lock outputs when activated. LED status indicators are provided to monitor input AC voltage, FACP status and to distinguish between an open or a short on the lock output terminals. Intelligent logic provides protection against accidental shorting of lock outputs.
Agency Listings
• UL Listed for Access Control Systems (UL294),
CUL Listed - CSA Standard C22.2 -M1983, Signal Equipment.
File# BP6714.
• CSFM - California State Fire Marshal Approved.
File# 3774-1335:114.
• MEA - NYC Department of Buildings Approved.
Features/Specifications
• Two (2) 24VDC individually or simultaneously controlled lock outputs
rated @ 16 amp for 300ms.
• One (1) 12VDC filtered regulated auxiliary output
rated @ 1 amp continuous supply current.(Not affected by FACP trigger)
• One (1) 24VDC filtered regulated auxiliary output
rated @ 1 amp continuous supply current.(Not affected by FACP trigger)
• Two (2) delayed follower form "œC" relay outputs
rated @ 1 amp/28VDC. Delay time is selectable .5 seconds or 1 second.
Energized duration is 1 second.
• Two (2) follower form "œC" relay outputs rated @ 1 amp/28VDC.
Relays energize while input is closed.
• Input 115VAC 50/60Hz, 1.9 amp.
• Two (2) N/O Trigger Inputs.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Maximum charge current .3 amp.
• Green LED indicates input 115VAC present.
• Green LED indicates panic device status (short, open or triggered).
• Red LED indicates when FACP disconnect is triggered.
• Fire Alarm Disconnect:
- Normally Closed FACP trigger input.
- Programmable Fire Alarm Disconnect options:
a) Removes power to outputs and disables delayed follower relays.
b) Connects power to lock outputs and enables delayed follower relays.
• LK1 and LK2 adjust the panic device release time for the lock outputs from 300ms to 30 sec.
• Lifetime Warranty.
Enclosure
• Accommodates up to two (2) 12VDC/7AH batteries.
• Dimensions: 13.5"H x 13"W x 3.25"D.
• 1/2" and 3/4" combination knockouts.
Panic Device Power Controller
Overview
This dual channel unit is designed to provide 24VDC power for a maximum of two electrified panic devices with very high inrush requirements. Each channel has an adjustable relock delay input that will control a pair of doors simultaneously or independent control of two single doors. Unit has two sets of relays per channel which can be configured to trigger external relays, automatic door openers, ADA push plate switches etc. Unit can control automatic door operators where the doors are always locked or where the doors are unlocked during the business day. In addition, two un-switched auxiliary voltage outputs are provided for powering keypads, electronic timers, relays, etc. In addition, a programmable FACP interface will either provide power or remove power to the lock outputs when activated. LED status indicators are provided to monitor input AC voltage, FACP status and to distinguish between an open or a short on the lock output terminals. Intelligent logic provides protection against accidental shorting of lock outputs.
Agency Listings
• UL Listed for Access Control Systems (UL294),
CUL Listed - CSA Standard C22.2 -M1983, Signal Equipment.
File# BP6714.
• CSFM - California State Fire Marshal Approved.
File# 3774-1335:114.
• MEA - NYC Department of Buildings Approved.
Features/Specifications
• Two (2) 24VDC individually or simultaneously controlled lock outputs
rated @ 16 amp for 300ms.
• One (1) 12VDC filtered regulated auxiliary output
rated @ 1 amp continuous supply current.(Not affected by FACP trigger)
• One (1) 24VDC filtered regulated auxiliary output
rated @ 1 amp continuous supply current.(Not affected by FACP trigger)
• Two (2) delayed follower form "œC" relay outputs
rated @ 1 amp/28VDC. Delay time is selectable .5 seconds or 1 second.
Energized duration is 1 second.
• Two (2) follower form "œC" relay outputs rated @ 1 amp/28VDC.
Relays energize while input is closed.
• Input 115VAC 50/60Hz, 1.9 amp.
• Two (2) N/O Trigger Inputs.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Maximum charge current .3 amp.
• Green LED indicates input 115VAC present.
• Green LED indicates panic device status (short, open or triggered).
• Red LED indicates when FACP disconnect is triggered.
• Fire Alarm Disconnect:
- Normally Closed FACP trigger input.
- Programmable Fire Alarm Disconnect options:
a) Removes power to outputs and disables delayed follower relays.
b) Connects power to lock outputs and enables delayed follower relays.
• LK1 and LK2 adjust the panic device release time for the lock outputs from 300ms to 30 sec.
• Lifetime Warranty.
Enclosure
• Accommodates up to two (2) 12VDC/7AH batteries.
• Dimensions: 13.5"H x 13"W x 3.25"D.
• 1/2" and 3/4" combination knockouts.
We are pleased to bring you a charming range of pieces. Let us help you find the right choice in your shopping. We have a good reputation for providing our clients with a remarkable selection. Treat yourself to an enjoyable experience in convenience and pick something captivating. We at Neobits have all your bases covered, remarkable items are everywhere. Find a huge variety of similar nicely priced products bellow. If you have any questions, don't hesitate to contact our Customer Service department, after all, they are here for you. For a large variety and more related commodities, please visit other sub-categories for anything you need.