C2G USB 1.1 Superbooster Extender for Interactive Whiteboards - Network (RJ-45)USB 29338 C2G (Cables To Go) / Legrand
Astonishing product packed up with lots of utility, and much more - Electronics, Computer & Photo. It feels very good when the C2G USB 1.1 Superbooster Extender for Interactive Whiteboards exceeds its utility and pays off your investment. Check out C2G (Cables To Go), widely used for professional and consumer applications. Identify your requirements for equipment and accessory, and fully supply your self with smart products. Try some more products, see if you like them better: StarTech.com - 410VDSLEXT2 - StarTech.com 1 Port to 4 Port VDSL2 Ethernet Extender Kit Over Single-pair Wire - 10/100Mbps - 1km, or IntelliNet - 560962 - Intellinet 1-Port Gigabit High-Power PoE+ Extender Repeater and StarTech.com - USB2001EXT2 - StarTech.com 1 Port USB 2.0 over Cat5 / Cat6 Ethernet Extender - up to 330ft (100m).
One of the only solutions on the market designed and engineered for compatibility with 300 series and 500 series Promethean, SMART®, and other interactive whiteboard (IWB) models, the new USB 1.1 Superbooster Extender for Interactive Whiteboards is perfect for extending 1.1 signals up to 40m (131ft) to support any interactive whiteboard. Other USB extension solutions use a chipset that is incompatible with interactive whiteboards which can cause dropped signals and/or periodic spikes when the solutions are used together. Our Superbooster allows USB length limitations to be conquered and the interactive whiteboard to be installed in the best location. The booster is powerful yet simple, with no drivers to install or special software required, so it's compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect a USB cable from the IWB to the receiver; connect a Cat5 cable from the receiver to the transmitter, then connect the transmitter to an available USB port on the computer and the system is up and running. Bus-powered, it requires no external power source. Instead, the Superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.
Please Note: The power demands of IWB models may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver and the USB connection between the IWB and receiver.
This plug-and-play device consists of a transmitter unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect a USB cable from the IWB to the receiver; connect a Cat5 cable from the receiver to the transmitter, then connect the transmitter to an available USB port on the computer and the system is up and running. Bus-powered, it requires no external power source. Instead, the Superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.
Please Note: The power demands of IWB models may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver and the USB connection between the IWB and receiver.
- Product Type: Network Extender
- Product Type: Network Extender
- Manufacturer Part Number: 29338
- Manufacturer Website Address: http://www.cablestogo.com
- Limited Warranty: 1 Year
- Manufacturer: C2G
- Product Name: USB 1.1 Superbooster Extender for Interactive Whiteboards
- Brand Name: C2G
- Brand Name: C2G
- Height: 3.3"
- Width: 1.6"
- Depth: 1"
- Environmentally Friendly: Yes
- Environmental Certification: RoHS
- USB: Yes
- Network (RJ-45): Yes
We provide stunning and thrilling products. You can have extraordinary items, and so much more. In this comprehensive choice of top brands, you are sure to find just the thing you want! Do not hesitate to try out different categories for bargain purchases. Find a huge variety of similar convenient products bellow. If you have any questions, don't hesitate to contact our Customer Service department, after all, they are here for you. For a large variety and more related items, please visit other sub-categories for anything you need.
Related Products
- Microsemi - PD-PoE-Extender - Microsemi 1-Port, Extends PoE Range by Additional 100m, 802.3af /802.3at Output Power
- Altronix - EBRIDGE1CRT - Altronix Network Extender - Network (RJ-45)
- StarTech - USB2001EXT2 - StarTech.com 1 Port USB 2.0 over Cat5 / Cat6 Ethernet Extender - up to 330ft (100m) - 1 x Network (RJ-45) - 1 x USB - 328.08 ft Extended Range - Aluminum - Black
- Axis Communication - 5025-281 - AXIS T8129 PoE Extender
- StarTech - EOC1110K - StarTech.com Gigabit Ethernet over Coaxial Unmanaged Network Extender Kit - 2.4km
- IOGear - GUCE64 - IOGEAR Network Extender - 164.04 ft Extended Range
- Tripp Lite - B125-101-60-IRU - Tripp Lite HDMI Over Dual Cat5/Cat6 Video Extender Kit Transmitter Receiver IR - 100 ft Extended Range